PIONEER & RANE FACTORY AUTHORIZED!!!
CALL TOLL FREE 1.800.557.7464 FOR ANY QUESTIONS
System Package Includes:
- (1) Professional DJ Road Case By Odyssey SKU: FRGS10CDIW - Made for the RANE TTM57SL and (2) PIONEER CDJ 400 USB CD Players
- (1) Rane TTM 57 SL Mixer Scratch Live
- (2) Pioneer CDJ 400 turntables
- (1) DJ Headphones
- (1) Wired Microphone
- This system can be upgraded in the future to do Video DJ
The TTM 57SL Performance Mixer integrates Serato Scratch Live with the best of Rane's hardware. Now you can control Scratch Live from your mixer without touching your laptop!
SCRATCH LIVE CONTROL SURFACE
Navigate through your library, load tracks, hit cues, loop and control effects all from the mixer's control panel.
The features and functionality of your mixer will improve with each new release of Scratch Live software — and all Scratch Live updates are free!
Record your mix directly to hard drive, or record two analog sources simultaneously.
24-bit effects using Rane and Serato's award-winning studio and live sound software technologies, giving you professional studio-quality sound.
Rane's legendary patented magnetic faders are the fastest, most accurate, and longest-lasting on the planet.
EXTERNAL AUDIO INTERFACE
Use the TTM 57SL as a high-quality USB audio interface for your favorite Mac or PC software.
• Play a combination of digital and analog sources.
• Play up to two digital files controlled by vinyl or CD while recording your mix.
• Or, digitize two vinyl records or analog sources simultaneously.
• Cue analog and digital sources.
• Operate standalone as a no-compromise performance mixer.
TTM 57SL Mixer
Two Input Buses
- PGM 1 selects: Analog 1, Analog 2, Digital 1, Digital 2
- PGM 2 selects: Analog 3, Analog 4, Digital 1, Digital 2
- All analog inputs are phono or line capable
- Input Gain and Left/Right Pan controls 3-band, full cut Tone controls with Kill switches
Magnetic faders for Channel Faders and Crossfader
- Non-contact magnetic position sensor technology. No travel noise - No bleed - Ever!
- Independent Contour and Reverse controls
- Mic Input with Engage switch, Level control and 2-band Tone control
Three sets of Outputs, each with independent Level controls
- Main Out on XLR (balanced)
- Booth Out on 1/4" TRS (balanced)
- Auxiliary Out on RCA (unbalanced)
- Assign Program 1, Program 2 or Both to external FlexFx loop
Internal LFO Filter and Echo Effects with six possible insert points
- Pre- or Post-channel faders for Program 1 and Program 2
- Main Mix
- Auxiliary Input Bus
- Headphone Cue Monitor includes Cue Pan, Main Mix select and Level
8 Channels of Streaming Audio
- 16 bit / 44.1 kHz Streaming Audio
Four channels from computer
Stereo source Digital 1 and Digital 2
Four channels to computer
- Stereo Record 1 and Record 2
Record 1 and Record 2 may record:
- Pre- or Post-channel faders for Program 1 or Program 2
- Main Mix
- Auxiliary Input Bus
- Record 1 and Record 2 may record:
Vinyl / CD Control Inputs
- Stereo Record 1 may be used for 4-channels of control
- Select Analog 1 or Analog 2 for Control Input 1
- Select Analog 3 or Analog 4 for Control Input 2
Additional "soft" mixer controls used by Scratch Live & internal effects
- Foot switch input (Inputs on Tip and Ring; foot switch not included)
- Deck 1-2 switch
- Group switch
- B1 - B6 programmable switches
- P1 - P2 programmable Encoders with push switches
- J1 - J2 programmable Joysticks with push switches
- USB firmware updates
- Internal universal switching power supply (100-230 VAC)
- Unit size: 13.5"H x 10"W x 4"D (34.3 cm x 25.4 cm x 10.2 cm)
- Weight: 8.5 lb (3.8 kg)
- Shipping Size: 7.75"H x 12.75"W x 19.25"D (19.7 cm x 32.5 cm x 49 cm)
- Weight: 12 lb (5.5 kg)
Scratch Live supports all these file formats: Fixed and Variable Bit Rate MP3, AIFF, AAC, WAV, OGG Vorbis, CD Audio and direct from the mixer. Record from your Mic and immediately scratch as if it was on vinyl. Record direct from vinyl or CD and save as 16-bit 44.1 kHz stereo file.
Easily import your playlists and iTunes library. You can drag from Explorer (Windows) or the Finder (Mac) into the Scratch Live library. The crate and subcrate system helps organize your library and sets. Hot-swap external drives with fast automatic library merging and retention of crates. Browse your music collection by album, artist, BPM, or genre, with optional album art display. Intuitive search function can be applied to any field to find things quickly. Edit ID3 tags with full Unicode support.
Preprocessing of MP3 files is not required except to detect corrupt files or use the auto-BPM and auto-gain functions. Auto-BPM detects tempo information for tracks without it, saving it with each file. A tap tempo button allows you to enter your own. Auto-gain lets you set a target gain on any or all songs in your library. You can also manually adjust individual gain, remembered in each song file.
The Virtual Deck shows everything about the speed and position of a track. As the vinyl rotates, so does the line on the label. The circular progress bar around the edge is a visual representation of the position within the song. The time and remaining time are displayed in minutes and seconds. The turntable speed as a percentage of pitch shift is on the left, and the pitched BPM is on the right.
Different operating modes can be assigned to each Virtual Deck:
Absolute Mode — exact reproduction of record movement, needle drop through tracks – just like normal vinyl. The beginning of the track is mapped to the start of the record.
Relative Mode — skip-free scratching, jump to cue points, and pitch bend buttons combined with turntable control. This mode observes the relative forward and backward movement of the record, but does not regard the position within the record.
Internal Mode — mix with just your laptop using features modeled on DJ CD players. Rewind, Bend down, Play / pause reverse, Play / pause forward, Bend up, Fast forward.
Auto mode — play a sequence of tracks automatically.
With Key Lock on, the key or pitch of the song stays locked at what it would be if the track was playing at normal speed, regardless of the platter speed of the turntable or CD player. Key Lock has scratch detection, so it automatically turns off when scratching for a natural scratching sound.
Variable zoom waveforms centered around current position display horizontally or vertically. Waveforms are colored by frequency so you can distinguish instruments visually. Full track overview lets you quickly find where the beat drops, find breakdowns and choruses, and jump to any part of the song. The tempo display assists with rapid tempo matching of tracks. When the two tracks are matched to the same tempo, the peaks will line up. Beat display emphasizes the transients in tracks -- these are matched up when the two tracks are beat matched. Visual markers can be set for up to 5 cue points per song and triggered from the keyboard. Save up to 9 loops per track -- these loops are saved in the file, and will be present when you reload. Censor expletives on the fly with an instant quick-reverse and catch-up with no loss of timing or pitch.
MIDI control can interface USB controllers with Scratch Live. DJ controller support will vary. Check the release notes in the Downloads section at scratchlive.net for supported controllers.
Built-in help and tips in multiple languages are accessible anytime. There is even a low power warning when running off a laptop battery.
Scratch Live has special abilities only available with the TTM 57SL
Two Digital Effects Processors are installed in the TTM 57SL mixer instead of the software so they are available even when Scratch Live is not running. Effects may be synced to BPM and include echo, sweeping filters, phasing and flanging. The “soft” section of controls has multiple functions for controlling Scratch Live from the matched physical controls on the TTM 57SL. They also assign the Internal Digital Effects when the mixer is operated stand-alone without a computer. Six different preset groups optimize common controls for playback, cue/looping, effects, recording and library. You can customize any control or assign to MIDI with a right-click. Footswitch controls are mapped here as well.
USB Integration and MP3 Playback The CDJ-400s cosmetic design is simple and compact yet elegant with all of its various controls and features located directly on top of the unit. A USB port found on the face of the player allows DJs to play their MP3 music collection from a wide variety of portable music devices such as thumb drives, MP3 players or external hard drives. With the use of a multi-function selector knob/button and its large, bright, dot-matrix LCD display, locating and accessing of files from these types of music devices as well as MP3 music files on CD and CD-R/RW through the CD slot are done with a turn and press of the knob. DJ Software Compatibility and MIDI Control With more of today's DJs utilizing different DJ software for their performances, the CDJ-400 is also equipped with a PC mode. In this mode, the CDJ-400 is a native controller for software such as Pioneer DJS computer software and SERATO Scratch LIVE. For example, the movement of the pitch slider on the CDJ-400 can control the pitch slider on the computer software and no time code CD is required for audio control. The player can also act as a MIDI controller where the user can assign virtually every button on the player to trigger functions of various DJ software programs. Worlds First Scratch Jog Effect A highlight and an advancement of the CDJ-400 is its scratching capability. In addition to traditional vinyl mode scratching, Pioneer implemented the Worlds First Scratch Jog Effect. Three highlighted buttons, each assigned to a special effect, Bubble, Trans and Wah, creates unique scratching sound effects that can be enabled by the DJ on the fly. A hold button was also added to retain the different effects throughout the session or until its release, which can also be triggered at any point of play. Other Performance Features: Digital Loop functions: A variety of loops can be created for additional audio effects. Beat Loop: Automatically creates a four beat loop based on the tempo of the music (BPM) being played. Loop Divide: Rhythmically divides the loop to create different patterns. Hot Loop: Restarts the loop seamlessly from its entry without interruption of the music. Digital Jog Break: In CD mode the CDJ-400 contains three effects, Jet, Roll and Wah, which further enhances the audio by simply rotating the jog dial. The same buttons for the Scratch Jog Effect are assigned to the Digital Jog Break which are accessible at any point of play. Tempo Control: Four tempo modes, 6%, 10%, 16% and WIDE, provide additional speed control with a resolution of 0.02% in the 6% range. Cue/Loop Points: Up to 10 cue/loop points per disc, for up to 920 discs, can be stored to players memory. Jog Indicator: A red halo illumination around the jog provides instantaneous visual feedback to the DJ. Customizable Jog Wheel: Users can create their own customized image to insert under the removable jog wheel top. Digital Output: A digital output is available for a direct connection for clearer sound to a connected mixer. Resume Function: The function takes effect if a CD is ejected accidentally. Once the DJ re-inserts the disc, it automatically starts playing from exactly the point where it stopped
Odyssey Flite Ready Glide Style Coffins holds two medium format tabletop CD players, one 10" mixer and a laptop. Also features a second shelf specially designed to house a Serato, Torq, hard drive, and many other audio interfaces. Features include rugged built-in wheels, heavy duty spring loaded latches, stackable ball corners, and front access panels. Cabling is clean and easy through convenient access ports throughout.
Specs and Features:
• Patent Glide style trays
• Full foam lined interior
• Stackable ball corners
• Recessed hardware and latches
• Limited Lifetime Warranty
• Mixer well is 10.125"W x 3"H x 17 D
• Cd Well is 9.625"W x 3"H x 14.25" + 2.75"D
Note: Please do not transport your laptop in this case damage may occur.
19.5"W x 12.50"H x 34.5"D
21"W x 13.5"H x 35.5"D
The minimum operating system requirements for Scratch Live are:
- 1 GHz G4
- 1 GB RAM
- 1024 x 768 minimum screen resolution
- OSX 10.3.9 or higher
- Intel Macs require Scratch Live version 1.5 or higher
- Pentium 4 / 1.5 GHz (Intel processor)
- 1 GB RAM
- 1024 x 768 minimum screen resolution
- Windows XP with Service Pack 2 or higher
- Windows Vista requires Versions 1.7.2 or higher
Windows Vista 64-bit requires Versions 1.8.2 or higher
Windows 7 requires Versions 1.8.2 or higher
- Note that we recommend Windows XP over Vista or 7 for performance reasons. By using XP, you can have a lower latency (for a better vinyl feel) and better performance in general. We also recommend Windows 7 over Vista.
Please note: this is the minimum requirement to run Scratch Live. We recommend you use a higher spec computer, and particularly if you have a large library or use optional plugins, you will benefit from having more RAM.
Current Reviews: 0
This product was added to our catalog on Friday 19 October, 2012.